Created in Spain Tel. +0034606514122
Discount rates for early machines in each region.
ROTATING Equipment FOR HALAL BOVINE SACRIFICIAL RITUAL
Qualities AND Specialized Needs
- Frame fully establish with thick STAINLEES Steel sections.
- All screws are produced with stainless metal.
- The animals obtain the chamber via a rear, guillotine-like gate which opens pneumatically. The chamber incorporates an entrance hatch with a pusher for closing and main the animal in the direction of the head opening. Both pushers are hydraulic.
- The 4 lateral panels can be moved at will, each of them using hydraulic cylinders, 1 on each facet. This permits the animal to be caught by the sides, producing an all-round result devoid of detrimental the animal.
- The machine’s top rated is tilted with hydraulic cylinders to take out the animal once it has been decapitated.
- When the animal is locked within the device rear pusher forces the animal to set its head via the frontal opening. This activates a system to tie and immobilize the head, even though the facet panels shut to retain the animal nevertheless. Immediately after that the device turns close to its horizontal axes, leaving the animal upside down. This movement is achieved via a hydraulic engine.
- The entire device sits on a slew ring which can keep an axial load of up to ten thousand Kg.
- When the animal is sacrificed the operator opens the exit gate, and at the same time, the floor platform is tilted, so that the animal is eradicated on a galvanized tray to aid the relationship with the carry.
- Stainless metal tray for blood assortment with Inox Tramex.
- The entire procedure is carried out via a command panel specially intended for the process. All actions are carried out by press-buttons. A pneumatic guillotine hatch is offered to be mounted at the entrance area with lateral fences.
Post time: 01-30-2016